Skip to main content

How to Choose the Right Thumb Screw

Thumbscrew

Thumb screws offer a simple and effective fastening solution. Like most screws, they feature a threaded shank. You can fasten two or more parts by driving a thumb screw through them. As you tighten the thumb screw, it will apply a clamping force.

Thumb screws receive their name from their manual, thumb-based operation. You don’t tighten or loosen them using a screwdriver. Instead, you use your thumb. Grabbing a thumbscrew between your thumb and index finger and turning it will tighten it. Here’s how to choose the right thumb screw for your next project.

Easy-to-Grip Head

Pay close attention to the head when choosing a thumb screw. Since you’ll be turning it by hand, you should choose a style that’s easy to grip. Premium thumb screws are typically designed with a knurled head to prevent slippage. The textured head surface increases friction, allowing you to turn the thumb screw more easily.

Consider the Material

You can find thumb screws in different materials. Some of them are made of stainless steel, whereas others are made of carbon steel. There are even thumb screws available in plastic. Stainless steel thumb screws are commonly used in environments where humidity or moisture is a concern. Stainless steel has a high concentration of chromium to protect against rust and corrosion. Carbon steel, on the other hand, has more carbon, which increases its overall strength.

Specification

Don’t forget to check the hardware specification when choosing a thumb screw. Many thumb screws follow strict hardware specifications, such as 21316-23 vs 21316-47. Both specifications are military standard series, but they have different characteristics. 21316-23 thumb screws, for instance, have a thread diameter of 0.190 inches, whereas 21316-47 thumb screws have a slightly larger thread diameter of 0.312 inches.

Get the Right Length

One of the most important things to consider when choosing a thumb screw is the length. Like conventional screws, thumb screws are available in different lengths. If a thumb screw is too short, it may not extend through all the parts, in which case it will fail to apply a clamping force. If it’s too long, it may protrude out of the open-facing part. You can avoid problems such as these by choosing a length that matches your project.

Built-In Washer

Some thumb screws are designed with a built-in washer. Consisting of a round and flat plate-like accessory, it sits directly behind the head. The purpose of this built-in washer is to distribute the load across a larger area. If you’re using a thumb screw on a delicate assembly, the clamping load may crack or otherwise damage the assembly. A washer will spread this load across a larger area so that damage is less likely to occur.