Skip to main content

5 Key Benefits of MDL Fuses

Commercial airplane flying

Fuses play an important role in electrical systems. They are designed to protect circuit devices from overcurrent. When the current traveling through a circuit exceeds a safe level, the fuse will blow. As a result, devices connected to the circuit won’t be exposed to the excessive current. While some electrical systems use AGC fuses, however, others use MDL fuses. Below are five key benefits of MDL fuses.

#1) Time Delay

One of the ways in which MDL fuses differ from AGC fuses is that they have a time delay. AGC fuses are designed to blow immediately, whereas MDL fuses are designed to handle brief current spikes — assuming those spikes don’t exceed a safe level. This allows for connected devices to continue operating without interruption. If the circuit used AGC fuses, the devices would stop working due to brief current spikes.

#2) Keeps Motors Running

Motors often use MDL fuses due to their ability to handle brief current spikes. Many motors, including aircraft motors, have startup surges. They can draw five to 10 times their normal current when initially starting. This higher-than-normal current can blow conventional fuses like AGC fuses. MDL fuses, though, operate on a time delay, meaning they will only blow if the current exceeds a particular limit for a length of time, such as three to five seconds.

#3) Available in Different Current Ratings

You can find MDL fuses in many different current ratings. The current rating, of course, is the circuit’s intended operating current. When a fuse exceeds the current for which it’s rated, it will blow. Common current ratings for MDL fuses include 1/16 Amp to 30 Amps. Choosing an MDL fuse with a low rating may result in unnecessary circuit openings and, thus, increased downtime for connected devices. Choosing an MDL fuse with a high rating, on the other hand, may leave the connected devices susceptible to overcurrent.

#4) Durable

MDL fuses are very durable. While available in different styles, they typically consist of a heavy-duty glass body with nickel-plated brass end caps. Within the body is a wire coil. The end caps and coil are electrically conductive. However, if there’s too much current traveling through an MDL fuse for an extended period, the joints will break or the wire will burn.

#5) Less Maintenance

MDL fuses can cut down on maintenance. When a fuse blows, technicians must find and replace it to restore operation. MDL fuses can still blow, but they are designed specifically to handle minor current surges. This means devices will experience less downtime, and technicians will spend less time finding and replacing blown fuses.